Architectural Specifications C6

Self-powered 3-way column system with integrated amplifiers and digital signal processing.

/Description/
Self-powered 3-way column system with integrated amplifiers and digital signal processing (DSP). The column system consists of a subwoofer and two stackable speaker columns. The column system has analog signal inputs and Bluetooth® streaming. A dedicated subwoofer output can be used to integrate additional subwoofers into the system. Multiple column systems can be connected together in either a mono or stereo configuration through a system output. The 3-way column system can be used in medium-sized venues with a capacity of up to several hundred people. The column system is suitable for public address, monitoring and installation applications.

/System components/
1x subwoofer, 2x speaker column; integrated amplifiers with digital signal processing and multiple signal inputs

/Transducers/
2x 10" woofers with 2.5" voice coil, 6x 3.5" full range drivers with 1" voice coil, 2x 3.5" full range drivers with 1" voice coil and 2x 0.5" compression tweeters with 1" voice coil coaxially mounted with waveguide.

/Electro-acoustical requirements/
Frequency range (-3dB)*:				50 Hz - 21 kHz
Coverage angles (-6 dB) [H x V]:			120° x 25°
Maximum Peak SPL**:					126 dB

/Electronical requirements/
Amplification Type:					Class -D with SMPS (LF,MF); Class-A/B (HF)
Total Power***:						1500 W
Outpout power per channel****:				LF: 800 W, MF: 600 W, HF: 100 W
Protection:						Short circuit, Overheating, Overcurrent, Limiter
Operating voltage range:				100 VAC - 240 VAC, 50 - 60 Hz
Input sensitivity:					0 dBu
DSP:							48 kHz/24 bit with extended dynamics
Processing latency: 					1.1 ms
Processing:						Crossover, Limiter, EQ, Level

* Whole space, 1W / 1m
** Calculated Max. Peak SPL = Sensitivity + 10log10(output power)
*** Total power value is the sum of all individual channel output power
**** According to EIA-426B Standard
		

/User controls/
Power: 							On/Off switch
Output-Level: 						Main Level; Subwoofer Level
Input-Level:						Microphone; Line; Bluetooth®/MP3; HI-Z
System configuration:					Bluetooth® Pairing; Stereo/Mono mode switch

/Mechanical requirements/
Product dimensions [H x W x D] subwoofer:		347 x 750 x 532 mm
Product dimensions [H x W x D] columns:			855 x 100 x 129 mm
Net weight subwoofer:					35.5 kg
Net weight columns:					10.6 kg
Total weight:						46.1 kg	

/Audio connectors/
Microphone input: 					1x XLR-Combo-jack, balanced, 3-pin, female
Line input: 						2x XLR-Combo-jack, baöanced, 3-pin, female; 2x RCA-jack, unbalanced, 2-pin, female
Hi-Z input:						1x TS-jack, unbalanced, 2-pin, female
MP3 input:						1x 3.5mm TRS-jack, stereo unblanced, 3-pin, female
Bluetooth®-Streaming:					BT Version 4.0; A2DP v1.2 (SBC Codec), AVRCP v1.4
			
System Out-connectors: 					XLR connector, balanced, 3-pin, male; Mono Mode: mono summed L+R; Stereo Mode: only signal right (R)
Subwoofer-out:						XLR connector, blanaced, 3-pin, male; processed signal for routing to complementary subwoofer
Wiring XLR: 						Pin 2: Signal+; Pin 3: Signal-; Pin 1: Abschirmung
Wiring TRS:						Tip: Signal+; Ring: Signal-; Shaft: Ground
Wiring Stereo-TRS:					Tip: Left; Ring: Right; Shaft: Ground

/Power connectors/
Power connector						powerCON® 20A
Wiring powerCON:					Pin N: Neutral; Pin L: Hot; Pin E: Ground

/Enclosure/
Subwoofer: bass reflex plywood enclosure with black polyurea coating, powder-coated perforated steel protective grille, side handle recesses; non-slip rubber feet on underside
Speaker columns: Aluminum enclosure with black powder coating, protective grille made of powder-coated perforated steel

/Rigging/
4-point connector for mounting the lower speaker columns on top of the subwoofer; 4-point connector for mounting the upper speaker column on top of the lower speaker column

/Accessories/
Trasnport-Dolly; Flightcase