Architectural Specifications SMX 12A

Medium-sized 2-way coaxial monitor with integrated amplifiers and digital signal processing.

/Description/
2-way coaxial monitor for use as stage monitor and sound reinforcement system with integrated digital signal processing (DSP) and 2-channel amplifier for separate driving of the loudspeaker paths.

/Transducers/
1x 12" woofer with 3" voice coil and 1x 1" compression driver with 1.7" voice coil and concentric waveguide.

/Electro-acoustical requirements/
Frequency range (-3 dB)*:				65 Hz – 17 kHz
Frequency range (-10 dB)*:				60 Hz – 20 kHz
Coverage angles (-6dB) [H x V]:				80° x 80°
Maximum Peak SPL *:					129 dB
Crossover frequency:					1.4 kHz


/Electronical requirements/
Amplification type:					2-channel, class-D with SMPS
Total power **:						484 W
Output power (per channel):				LF: 416 W @ 6.5 Ω; HF: 68 W @ 14 Ω
Protection:						Short circuit, overheating, overcurrent, 2-band limiter
Operating Voltage:					100 VAC – 240 VAC, 50 – 60 Hz
Input sensitivity:					0 dBu
DSP:							48 kHz/24-bit with extended dynamics
Processing latency: 					1.1 ms
Processing:						Level, factory EQ presets

* Measured with 12 dB Crest factor Pink Noise, Whole space
** Total power value is the sum of all individual channel output power		


/User controls/
Power: 							ON/OFF switch
Level: 							8-position rotary knob (-50, -20, -10, -4, -2, 0, +2, +4)
DSP presets: 						8-position rotary knob


/Mechanical requirements/
Product dimensions [H x W x D] (Including rigging):	368 x 450 x 575 mm
Net weight:						22 kg

/Audio connectors/
Input signal: 						balanced XLR 3-pin female or balanced 6.5 mm TS jack
Link signal (output): 					balanced XLR 3-pin male
Anschlussbelegung XLR: 					Pin 2: Signal+; Pin 3: Signal-; Pin 1: Ground
Anschlussbelegung TRS:					Tip: Signal+; Ring: Signal-; Shaft: Ground

/Power connectors/
Power input: 						powerCON® 20A
Power link output: 					powerCON® 20A
Wiring powerCON:					Pin N: Neutral; Pin L: Hot; Pin E: Ground

/Enclosure/
Enclosure made of plywood in bass reflex design with black polyurea coating and non-visible, recessed connector panel. 35° beveled front; 3 recessed transport handles; non-slip Octopus feet; side-mounted M10 flying points; robust protective grille made of powder-coated perforated steel with backed acoustic foam. 

/Accessories/
Mounting bracket for wall, ceiling and pole mounting; height-adjustable speaker distance rod; protective transport cover; M10 to 35mm flange adaptor.