SMX 12A
"The key to good performance is a good monitor."
The SMX 12A has been designed as a multi-purpose, self-powered unit. It is a compact yet powerful tool for various monitoring requirements on and off stage. Eight DSP presets simplify the setup and tuning of the system. Furthermore, small to mid-size PA applications can be successfully achieved with an additional subwoofer for low frequency extension.
The M10 fly points and the additional mounting accessories increase its application range. The padded cover SMX 12TC protects the product during transport and storage. Finally, the daisy chain capability, the application presets and the mounting hardware allow safe permanent or non-permanent installation jobs.
Compact
Small footprint (coaxial design)
Cable Management
Due to the recessed I/O panel of the monitoring system, no connectors are visible to the viewer.
Neutral tool and no instrument
Flexible and predictable in adapting to individual needs in the mix
Flexible / Multifunctional
Also as front and sidefill on stand or stack, design also allows installation
Matching subwoofer
Available as low frequency support is the S15 PRO
Maximum sound pressure (aktive)
Max SPL 129 dB
Reliable
Low distortion over the entire frequency range (active), unbreakable, temperature stable, polyurea coating
2 way limiter (multiband)
The limiter separates at excessive load in the low frequency range without limiting the frequencies in the mid-high range
High efficiency
Where it is necessary - namely in the fundamental - midrange. This results in lower distortion and lower operating temperature.
Features
12" High efficiency woofer
SMX 12A is a compact yet powerful tool for various monitoring requirements on and off stage.
8 intelligent DSP presets
Gain and a special preset selector with 8 practical factory settings increase the application range.
Recessed connector panel
Due to the recessed I/O panel of the monitoring system, no connectors are visible to the viewer.
Related products
S15 PRO
SMX 12
Specifications
| Model: | SMX 12A |
|---|---|
| ACOUSTICAL | |
| Frequency range (-3 dB): | 65 Hz - 17 kHz |
| Frequency range (-10 dB): | 60 Hz - 20 kHz |
| Coverage (-6dB) [H x V]: | 60° x 60° |
| Maximum Peak SPL *: | 129 dB |
| System type: | 2-way coaxial system |
| Crossover frequency: | 1.4 kHz |
| Transducers: | Coaxial driver with: LF: 1 x 12'' driver HF: 1'' compression driver |
| Enclosure Type: | Vented box |
| AMPLIFICATION | |
| Type: | 2 channel, class-D with SMPS |
| Total power **: | 484 W |
| Output power (per channel): | LF: 416 W @ 6.5 Ω HF: 68 W @ 14 Ω |
| Protection: | Short circuit, overheating, overcurrent, 2-band limiter |
| Connectors: | Input Signal: balanced XLR 3-pin female or balanced 6.5 mm TS jack Link output: balanced XLR 3-pin male Power input: powerCON® 20A Power link output: powerCON® 20A |
| Wiring: | Pin 1: Ground Pin 2: Positive Pin 3: Negative |
| Input sensitivity: | 0 dBu |
| DSP: | 48 kHz/24-bit with extended dynamics Processing latency: 1.1 ms |
| Processing: | Level, factory EQ presets |
| User controls: | Power: ON/OFF switch Level: 8-position rotary knob (-50, -20, -10, -4, -2, 0, +2, +4) DSP presets: 8-position rotary knob |
| MECHANICAL | |
| Product dimensions [H x W x D] (Including rigging): | 368 x 450 x 575 mm |
| Net weight: | 22 kg |
| Packaging dimensions [H x W x D]: | 447 x 535 x 660 mm |
| Total weight: | 25 kg |
| Cabinet: | 15 mm plywood |
| Cabinet finishing: | Black polyurea coating |
| Grille: | Powder coated perforated steel |
| Hardware: | 1 top and 2 side handles embedded in cabinet Rubber Feet 2 x M10 for U-bracket mounting |
| Rigging: | - |
| User controls: | - |
| ACCESSORIES | |
| U-bracket: | SMX 12UB |
| Pole bar: | SPS20 |
| M10 screw to 35mm pole socket: | PS35 |
| Transport cover: | SMX 12TC |
| All product specifications are subject to change without prior notice. | * Measured with 12 dB Crest factor Pink Noise, half space ** Total power value is the sum of all individual channel output power |
Accessories
SMX 12UB
This U-bracket provides mounting holes for wall mounting or pole support adapter PS35 or other industry-standard hardware, like truss clamp.
SPS20
Distance bar/pole support to connect from M20 thread in subwoofers to PS35.
PS35
Pole support adapter, model PS35, M10 to 35 mm speaker poles.
SMX 12TC
SMX 12 transport and storage protection cover
