B 18
The B 18 comprises a single 18″ driver mounted in a vented box, with a sophisticated adaptive port that optimises the airflow and improves its response. This technology, developed through exhaustive research, enables a lower cut-off frequency while having smaller volume. This translates into deeper and dynamic bass from a compact enclosure.
In addition to the speakON® connectors on the back, the subwoofer includes two additional located on the front. This guarantees wiring flexibility and ease of use, reducing setup time even in large configurations.
Finally, the set of accessories specially designed for the B-Line, makes their setup and transportation easier, safer and more comfortable.
Features
Sockets at front grill
Convenient multiple Neutrik speakON® sockets in front* and back allows for easy set up ideal for live performances.
Cardioid subwoofer setups
Due to the intelligent stacking design and the front* and rear sockets, it is possible to operate our B-Line subwoofers as a cardioid setup without any problems.
* B 15A and B 15A W do not have any front sockets.
Starfish rubber-feet
Our so called “starfish rubber-feet” are made from some flexible rubber/plastic material, which provides good slip resistance.
Alternatives
B 15
B 15A
B 21
Specifications
| Model: | B 18 |
|---|---|
| ACOUSTICAL | |
| Frequency range (-3 dB) *: | 37 Hz - 130 Hz |
| Frequency range (-10 dB) *: | 29 Hz - 160 Hz |
| Coverage angles (-6dB) [H x V]: | Omnidirectional |
| Nominal impedance: | 8 Ω |
| Sensitivity**: | 98 dB |
| Peak power: | 2400 W |
| Continuous power ***: | 600 W |
| Maximum Peak SPL ****: | 138 dB |
| System type: | 1-way passive system |
| Crossover frequency: | - |
| Transducers: | 1 x 18" driver |
| Enclosure: | Vented box |
| Connectors: | Input / Link signal: 4 x Neutrik speakON® NL4 Link output: 1 x Neutrik speakON® NL4 |
| Wiring: | Pins 1+/1- : driver Pins 2+/2- : link (Output CH 2, pins 1+/1-) |
| MECHANICAL | |
| Product dimensions [H x W x D] (Including rigging): | 572 x 542 x 797 mm |
| Net weight: | 41 kg |
| Packaging dimensions [H x W x D]: | 721 x 615 x 885 mm |
| Total weight: | 49.5 kg |
| Cabinet: | 15 - 18 mm plywood |
| Cabinet finishing: | Black or white polyurea coating |
| Grille: | Powder coated perforated steel |
| Hardware: | 2 SE Audiotechnik® ergonomic handles 4 rubber feet and top recesses for stacking M20 Pole thread |
| Stacking: | Two-Point SE Audiotechnik® stacking system |
| Splay angles: | - |
| ACCESSORIES | |
| Stacking frame for M-F3A PRO: | B18 SFi M |
| Stacking frame for L35: | B18 SFi L35 |
| Pole bar: | SPS20 |
| Flight case: | B18 FC |
| Transport dolly: | B18 TD |
| Transport cover: | B18 TC |
| All product specifications are subject to change without prior notice. | * Measured with a 6th-order Butterworth low-pass filter applied at 130 Hz ** Half space, 1W / 1m, on axis *** According to EIA-426B Standard (based on RMS Voltage) **** Max Peak SPL = Sensitivity + 10log10(Continuous Power) + 12 dB Crest Factor |
Accessories
B18 SFi M
Stacking frame for mounting the M-F3A PRO on top of a B 18 subwoofer
B18 SFi L35
Stacking frame for mounting the L 35 on top of a B 18 subwoofer
SPS 20
M20 Pole Support to pole mount an M-F3A or M-F3A PRO on any B-Line subwoofer
B18 FC
Flightcase for B 18 subwoofer
B18 TD
Dolly board for B 18 subwoofer
B18 TC
Transport cover for B 18 subwoofer
