Amps & Controller
IA 202D
Available in:Africa, Australasia, Caribbean, Central America, East Asia, EU, Europe, Middle East, North America, Oceania, South America, South Asia, Southeast Asia
Technical details
| Model Name | IA 202D |
|---|---|
| Type | 2-channel Class-D Power Amplifier |
| ELECTRICAL DATA | |
| Type | Class-D, Switched Mode Power Supply |
| Channels | Two |
| Rated Output Power (1kHz, THD <1%)* | 2 × 250 W @ 8 Ω 2 × 150 W @ 16 Ω |
| Minimum load impedance | 8 Ω |
| Frequency response (±1 dB)** | 20 Hz – 20 kHz |
| Damping factor | > 200 |
| Input impedance | 10 kΩ balanced/unbalanced |
| Maximum input level | +20 dBu |
| SNR Line In to Spk out | 90 dB |
| Noise Floor | -52 dBu (A-weighted) @4 dBu sensitivity, 0 dB master attenuation |
| Channel crosstalk | 64 dB |
| THD+N | < 0.1% @ 1 W,1 kHz; <0.3% @ 1 dB below rated power |
| DSP | 48 kHz/24 bit DSP processor Processing latency: 1.1 ms |
| Protection | Short circuit, overheating, overcurrent |
| Cooling | Sensor controlled fan; Front-to-back air flow |
| Power efficiency | Up to 76% |
| Power consumption | Idle: 29 W Full power: 600 W |
| Operating voltage range | 100 – 240 VAC 50/60 Hz |
| HARDWARE | |
| Screen | LCD, 4x20 symbol alpha-numeric |
| User controls | Control encoder with push-button, Power On |
| Input signal connectors | XLR-3 female line-level inputs; XLR-3 male link outputs; Phoenix MSTP 3-pin inputs and link outputs |
| Output signal connectors | Neutrik SpeakON® NL4 outputs; Phoenix Contact MSTB 4-pin outputs |
| Power connector | IEC-60320 C14 |
| SOFTWARE | |
| DSP Features | Levels, Parametric EQ, Channel Delay up to 700 Samples ≈ 14.6 ms ≈ 5 m/16.4 ft (Ch. A+B mode: up to 1400 Samples ≈ 29.2 ms ≈ 10 m/32.8 ft), Phase, Input Sensitivity, RMS Limiter, Peak Limiter, IIR/FIR Filtering |
| Configuration handling | Loading of factory presets provided by SE; Saving and recalling of user presets |
| Monitoring | Temperatures |
| MECHANICAL DATA | |
| Product dimensions [H x W x D] | 66 × 483 × 256 mm / 1.5 RU |
| Net weight | 4.7 kg |
| Packaging dimensions [H x W x D] | 143 × 588 × 380 mm |
| Total weight | 7.25 kg |
| Cabinet | Aluminium front panel, steel body |
| Rack mounting | Four frontal 6 mm holes at both sides |
| Operating temperature range | [0°C ; 40°C] |
| Storage temperature range | [-40°C ; 70°C] |
| ANNOTATION | |
| * | According to IHF-A-202. |
| ** | Preset "Flat" |
Packaging:
Cardboard outer packaging: 77.29% (810 g) | Foam inner padding: 20.99% (220 g) | Plastic protective sleeve: 1.72% (18 g)
The following overview contains information on the regulated substances used in the product and on compliance with the applicable limit values.
"Lead (Pb): Used in printed circuit boards (printed circuit board | electronic components on the PCB | internal connecting wires | copper traces) (permitted exemption).
"
"Lead (Pb): Used in connectors (electrical connectors) (permitted exemption). "
Mercury (Hg): The content is not detectable or is below the applicable regulatory limits.
Cadmium (Cd): The content is not detectable or is below the applicable regulatory limits.
Hexavalent Chromium (Cr(VI)): The content is not detectable or is below the applicable regulatory limits.
Polybrominated Biphenyls (PBB): The content is not detectable or is below the applicable regulatory limits.
Polybrominated Diphenyl Ethers (PBDE): The content is not detectable or is below the applicable regulatory limits.
"Lead (Pb): Used in connectors (electrical connectors) (permitted exemption). "
Mercury (Hg): The content is not detectable or is below the applicable regulatory limits.
Cadmium (Cd): The content is not detectable or is below the applicable regulatory limits.
Hexavalent Chromium (Cr(VI)): The content is not detectable or is below the applicable regulatory limits.
Polybrominated Biphenyls (PBB): The content is not detectable or is below the applicable regulatory limits.
Polybrominated Diphenyl Ethers (PBDE): The content is not detectable or is below the applicable regulatory limits.
Environmental Protection Use Period: 15 year(s)
