L-Line
L 35 FS
Available in:Africa, Australasia, Caribbean, Central America, East Asia, EU, Europe, Middle East, North America, Oceania, South America, South Asia, Southeast Asia
Technical details
| Model Name | L 35 FS |
|---|---|
| Type | 1-way passive subwoofer system |
| TECHNICAL INFORMATION | |
| ACOUSTICAL DATA | |
| Frequency range (-3 dB)* | 60 Hz – 730 Hz |
| Frequency range (-6 dB)* | |
| Frequency range (-10 dB)* | 47 Hz – 790 Hz |
| Coverage angles (-6 dB) [H x V] | Omnidirectional |
| Nominal impedance | 8 Ω |
| Sensitivity* | 91 dB |
| Peak power | 1200 W |
| Continuous power** | 300 W |
| Maximum Peak SPL*** | 128 dB |
| System type | 1-way passive system |
| Crossover frequency | – |
| Transducers | 1 × 8" driver (2.6" voice coil) |
| Enclosure type | Vented box |
| Connectors | Input signal: 1 × Neutrik speakON® NL4 Link output: 1 × Neutrik speakON® NL4 |
| Wiring | Input signal: switchable 1+/1- or 2+/2- Link output: 1+/1- and 2+/2- |
| MECHANICAL DATA | |
| Product dimensions [H x W x D] (incl. rigging) | 379 × 312 × 244 mm |
| Net weight | 9.4 kg |
| Packaging dimensions [H x W x D] | 473 × 410 × 340 mm |
| Total weight | 11 kg |
| Cabinet | 12 mm plywood |
| Cabinet finishing | Black or white polyurea coating |
| Grille | Powder coated perforated steel |
| Hardware | – |
| Rigging | Three-point rigging system: two front and one rear 6 mm SE Audiotechnik® locking pins. |
| Splay angles | 0º |
| ACCESSORIES | |
| L 35 BF | Bumper frame |
| ANNOTATION | |
| * | Whole space, 1W / 1m, on axis |
| ** | According to EIA-426B Standard (based on RMS Voltage) |
| *** | Max Peak SPL = Sensitivity + 10log10(Continuous Power) + 12 dB Crest Factor |
Related products and accessories
Packaging:
Cardboard outer packaging: 82.80% (1040 g) | Foam inner padding: 14.33% (180 g) | Plastic protective sleeve: 2.87% (36 g)
The following overview contains information on the regulated substances used in the product and on compliance with the applicable limit values.
"Lead (Pb): Used in printed circuit boards (printed circuit board | electronic components on the PCB | internal connecting wires | copper traces) (permitted exemption).
"
"Lead (Pb): Used in connectors (electrical connectors) (permitted exemption). "
Mercury (Hg): The content is not detectable or is below the applicable regulatory limits.
Cadmium (Cd): The content is not detectable or is below the applicable regulatory limits.
Hexavalent Chromium (Cr(VI)): The content is not detectable or is below the applicable regulatory limits.
Polybrominated Biphenyls (PBB): The content is not detectable or is below the applicable regulatory limits.
Polybrominated Diphenyl Ethers (PBDE): The content is not detectable or is below the applicable regulatory limits.
"Lead (Pb): Used in connectors (electrical connectors) (permitted exemption). "
Mercury (Hg): The content is not detectable or is below the applicable regulatory limits.
Cadmium (Cd): The content is not detectable or is below the applicable regulatory limits.
Hexavalent Chromium (Cr(VI)): The content is not detectable or is below the applicable regulatory limits.
Polybrominated Biphenyls (PBB): The content is not detectable or is below the applicable regulatory limits.
Polybrominated Diphenyl Ethers (PBDE): The content is not detectable or is below the applicable regulatory limits.
Environmental Protection Use Period: 15 year(s)
