IC 32

Ultra-compact, clear and discret

IC 32
IC 32 (Rückansicht)
IC 32 W
IC 32 W (Rückansicht)

Thanks to their extraordinarily compact dimensions and simple, elegant design, the IC 32 and IC 34 full-range speakers blend discreetly into any environment. Their high-quality aluminium housing perfectly conveys the demanding quality standards of speech intelligibility, directivity and durability. Two powerful 3.5″ neodymium drivers are built into the IC 32, while four drivers in the IC 34 ensure crystal-clear sound.

Both models have been optimised for best possible speech intelligibility and cost efficiency. With a wide horizontal dispersion angle of 120°, large areas can be covered with few speakers thus saving you money. At the same time, the narrow vertical dispersion angle of only 60° efficiently reduces unwanted reflections. No information is lost whilst all sound remains focused on the listeners.

The 3.5″ driver, which we developed and produced in-house, delivers a consistently surprising performance considering the very compact dimensions of the speakers. Components produced in-house such as the innovative, high-performance cooling module and the high-quality membrane inside the ultra-compact IC 32 and the powerful IC 34 support the powerful sound and excellent speech intelligibility. The result is a performance that only significantly larger loudspeakers can otherwise offer. In combination with an S 112i PRO subwoofer, the result is an impressively rounded sound image for music playback, without interfering with the appearance and ambience of the room.

Both models use two 4-pin Phoenix connectors and a built-in 2-way switch to select between two signal channels, making wiring as simple and cost-effective as possible.

Slim

Always incl. holder

High range

Aluminium housing

4 Year Warranty

Worry-free

Interested in the product?

Then make an appointment now.

Features

Easy Mounting

I-Line column speakers are built to be used together with SE AUDIOTECHNIK SMB Smart Mounting Bracket. Together with this bracket a quick and intuitive speaker placement and aiming can be achieved in any installation. IC 32 is equipped with one mounting position on the center of the back panel that allows for both vertical and horizontal orientation.

Die-cast Aluminum Body

The cabinet of IC 32 is made from solid die-cast aluminum for maximum rigidity and to ensure that the speakers last for years to come. Aluminum also allowed us to create an elegant form and design that will easily fit in many environments. All I-Line speakers are available in black and white color.

Connectivity

All I-Line column speakers are equipped with Phoenix MSTB 4-pin input and link connectors for quick and easy connection. Additionally they all have built-in 2-way switch that allows users to select between two signal channels. Cost-saving, improved looks and faster installation times are the most significant benefits when used with 4-wire cables. Our IA 202D and IA 402D power amplifiers have dual-channel output to make installations easy and care-free.

Related Products

IC 34
Ultra-compact, clear and discreet
IC 38X
Exceptionally powerful, unusually light and spot-on
IA 402D
Whisper-quiet, efficient and easy to use
S112i PRO
Compact signal extension in the bass range
Previous
Next

References

Production Partner Approved

I-Line Review in Production Partner Magazine 1|2021

With the I-Line, the Solingen-based manufacturer SE Audiotechnik presents a series of compact loudspeakers with sets consisting of two tops in column design, two DSP amplifiers and an active 12” subwoofer. How will this combination perform in fixed installations?

Specifications

Model:IC 32
ACOUSTICAL
Frequency range (-3 dB):150 Hz – 17 kHz
Frequency range (-10 dB):100 Hz – 20 kHz
Coverage angles (-6dB) [H x V]:120° – 60°
Nominal impedance:16 Ω
Sensitivity *:91 dB
Peak power:400 W
Continuous power **:100 W
Connectors:Input / Link: Phoenix contact MSTB 4-pins
User controls:2-positions input selection switch
Wiring:Pins 1+/1- or 2+/2- (switchable)
Maximum Peak SPL *:123 dB
System type:1-way passive system
Transducers:2 x 3.5″ neodymium drivers
Enclosure type:Vented box
Connectors:Input / Link: Phoenix contact MSTB 4-pins
User controls:2-positions input selection switch
Wiring:Pins 1+/1- or 2+/2- (switchable)
MECHANICAL
Product dimensions [H x W x D] (Including rigging):247 x 116 x 150 mm
Net weight:2 kg
Packaging dimensions [H x W x D]:405 x 268 x 375 mm
Total weight:6.35 kg
Cabinet:Die-Cast aluminium housing, plastic
Cabinet finishing:Black or white powder coating
Grille:Powder coated perforated steel
Mounting:Centered mounting point for SMB bracket
Vertical and horizontal orientation
Safety wire fixing point
ACCESSORIES
Smart Mounting BracketSMB
All product specifications are subject to change without prior notice.* Whole space, 1W / 1m, on axis. With dedicated IA 402D amplifier´s preset.
** According to EIA-426B Standard (based on RMS Voltage)
*** Max Peak SPL = Sensitivity + 10log10(Continuous Power) + 12 dB Crest Factor

Accessories

SMB (wird mit dem Produkt ausgeliefert) - Einfache, flexible Montage

The SMBSmart Mounting Bracket – was developed for uncomplicated, time-saving installation and the greatest possible flexibility in alignment; the intelligent wall bracket. With this bracket, the speakers can be installed quickly and easily almost anywhere and at an ideal angle in order to optimise directivity.

The SMB, designed in Germany, is included with every I-Line speaker and was specially designed for use with our column speakers. An SMB mounted column speaker can be adjusted on both axes by up to ± 90° in 10° steps.

The SMB has a maximum load-bearing capacity of 10 kg and is supplied together with a 20 cm long steel cable for securing in accordance with international guidelines.

Downloads