CV 212

Compact 2-way passive loudspeaker

The CV 212 is a powerful yet compact 2-way passive loudspeaker, designed to fulfill the most demanding requirements in a wide range of PA, monitoring and installation applications.

Two 12” woofers mounted in a fine-tuned vented housing, generate twice SPL levels over the lower frequencies, while keeping ample headroom for maximal performance. In addition, a 1.4″ compression driver with horn covers the mid and high frequencies for defined reproduction across the entire audible frequency range. With a continuous power handling of 800 W (3,200 W peak) and a sensitivity of 100 dB (1W/1m), this speaker is capable of delivering high quality sound with a wide dynamic range up to a maximum sound pressure level of 141 dB.

The CV 212 is equipped with a rotatable horn that allows the vertical and horizontal coverage to be swapped. The two speakON® NL4 connectors simplify cabling and signal distribution. In addition, the special housing design offers various set-up options and orientations. Handling and installation is as easy as it is safe thanks to the ergonomic handles, the M10 flying points, the M20 pole mounting support and the CV 212 UB U-bracket.

From live sound events to theaters and houses of worship, either as a floor, standing or suspended sound system, many venues and applications benefit from this exceptional loudspeaker. CV 212 can be expanded with SE subwoofers such as CV-118B, CV-218B, B 18 or B 21.

Features

Performance

2x 12” high efficiency woofers (3” VC), 1.4” compression driver (3” VC), 800 W continuous power handling (3,200 W peak), up to 141 dB max. SPL (peak), 100 dB sensitivity (1W/1m), 50 Hz – 16 kHz usable frequency range

Versatility

Rotatable 90° x 60° horn, CV 212 can be used on the floor, standing or suspended (14x M10 flying points), M20 pole mounting support, U-bracket CV 212 UB for easy mounting and alignment, expandable with CV or B-Line subwoofers

Reliability

Wooden enclosure, polyurea coating, rugged front grille with mesh backing, rubber feet for excellent grip, ergonomic handles

Application

Suitable for live sound, theaters, clubs, event halls and houses of worship

Related Products

Previous slide
Next slide

Specifications

CV 212 Drawing

Model:CV 212
ACOUSTICAL
Frequency range (-3 dB)*:100 Hz – 15 kHz
Frequency range (-10 dB)*:50 Hz – 16 kHz
Coverage angles (-6dB) [H x V]:90° × 60°, HF-horn rotatable
Nominal impedance:4 Ω
Sensitivity*:100 dB
Peak power:3200 W
Continuous power**:800 W
Maximum Peak SPL***:141 dB
System type:2-way system
Crossover frequency:1.15 kHz
Transducers:LF: 2 x 12″ driver (3″ voice coil)
HF: 1.4″ compression driver (3″ voice coil)
Enclosure type:Vented box
Connectors:Input signal: Neutrik speakON ® NL4
Link output: Neutrik speakON ® NL4
Wiring:Pins 1+/1- : drivers
Pins 2+/2- : link signal to pins 1+/1- of THRU output
MECHANICAL
Product dimensions [H x W x D] (Including rigging):1017 x 380 x 388 mm
Net weight:35 kg
Packaging dimensions [H x W x D]:1123 x 480 x 485 mm
Total weight:38 kg
Cabinet:15 mm plywood
Cabinet finishing:Black polyurea coating
Grille:Powder coated perforated steel
Hardware:Two side plastic cup handles
Four bottom rubber feet
14 x M10 threads for hanging: 3 on top, bottom and sides, and 2 on the rear.
ACCESSORIES
Pole bar:SPS20
U-bracket for truss hanging:CV 212 UB
All product specifications are subject to change without prior notice.* Half space, 1W / 1m, on axis
** According to EIA-426B Standard
*** Max Peak SPL = Max. Cont. SPL (Cont. Power / 1m) + 12 dB Crest Factor

Downloads

CV 212 Manual English

Downloadfile Icon
File Size 3,9MB
Version v202107
Downloads 1857

CV 212 Data Sheet English

Downloadfile Icon
File Size 1,1 KB
Version v202205
Downloads 2688

EU Declaration of Conformity – Passive Loudspeakers

Downloadfile Icon
File Size 300 kB
Version v202108
Downloads 3669

EU Declaration of Conformity – Rigging and Accessories

Downloadfile Icon
File Size 111 kB
Version v202312
Downloads 6709