S 112i PRO
Compact signal extension in the bass range
The S 112i PRO subwoofer is the perfect addition when crystal-clear speech intelligibility and pleasantly balanced music playback are required. The S 112i PRO has been specially developed for maximum flexibility thanks to its small size and minimal weight, and therefore fits perfectly into the I-Line. With a 400 W Class-D power amplifier module, it is the right choice in almost every location to round off the sound experience of an I-Line system in the bass range.
The 24bit/48kHz DSP processor, specially tailored to the I-Line speakers, provides additional signal filtering and maximum driver protection. With its compact, elegant design, the S 112i PRO can be easily integrated into any bar, café or conference room.
Easy to use
DSP on Board
S 112i PRO subwoofer is equipped with 400W class-D power amplifier with switching-mode power supply for minimum weight and maximum flexibility anywhere in the world. Additionally to that our 24bit/48kHz DSP processor provides signal filtering and ensures maximum driver protection.
EASE® GLL Coming Soon
The preparation of AFMG® EASE® and EASE® Focus 3 GLL files for S 112i PRO subwoofer are already in progress. The rest of the I-Line will follow soon. This will help and allow users to simulate and calculate various parameters such as audience coverage, SPL levels, frequency response, delay times and more for quicker and well thought-out installations.
EASE® and AFMG® are registered trademarks of AFMG Technologies GmbH.
I-Line Review in Produciton Partner Magazine
With the I-Line, the Solingen-based manufacturer SE Audiotechnik presents a series of compact loudspeakers with sets consisting of two tops in column design, two DSP amplifiers and an active 12” subwoofer. How will this combination perform in fixed installations?
|Model:||S 112i PRO|
|Frequency range (-3 dB)*:||42 Hz – 250 Hz|
|Frequency range (-10 dB)*:||36 Hz – 300 Hz|
|Coverage angles (-6dB) [H x V]:||Omnidirectional|
|Maximum Peak SPL **:||132 dB|
|System type:||1-way active system|
|Transducers:||1 x 12″ driver|
|Enclosure type:||Vented box|
|Type:||Single channel, class-D with SMPS|
|Total Power:||800 W|
|Protection:||Short circuit, overheating, overcurrent|
|Connectors:||Input signal: balanced XLR 3-pin female |
Link output: balanced XLR 3-pin male
Power input: powerCON® 20A
Power link output: powerCON® 20A
|Wiring:||Pin N: Neutral |
Pin L: Conductor
Pin E: Ground
|Input sensitivity:||0 dBu|
|DSP:||48 kHz/24 bit with extended dynamics |
Processing latency: 1.1 ms
|Processing:||Factory and user presets, directivity control, EQ, delay, phase inversion|
|User controls:||Power: ON/OFF switch |
DSP: display with digital encoder
|Product dimensions [H x W x D] (Including rigging):||507 x 355 x 495 mm|
|Net weight:||23 kg|
|Packaging dimensions [H x W x D]:||593 x 435 x 580 mm|
|Total weight:||25.2 kg|
|Cabinet:||15 mm plywood|
|Cabinet finishing:||Black or white polyurea coating|
|Grille:||Powder coated perforated steel|
|Hardware:||Two side handles embedded in cabinet |
4 rubber feet and top slots for stacking
M20 pole thread
|Rigging:||4 rubber feet |
2x M10 thread on each side and 4 on top
|All product specifications are subject to change without prior notice.||* Measured with GENERAL preset with 6th-order Butterworth low-pass filter applied at 240 Hz. |
** Measured with 12 dB Crest factor Pink Noise, half-space.