SMX 12A

One key to a good performance is a good monitor!

SMX 12A
SMX 12A (Rückansicht)

The active SMX 12A is a compact, extremely versatile 2-way coaxial monitor in bass reflex design. Thanks to the built-in 12″ LF with powerful 3″ voice coil and a 1″ HF with a 1.7″ voice coil, the SMX 12A monitor is powerful and assertive in any mix and feature a harmonious, neutral sound character. This allows any musician to hear themselves better and bring out every nuance of their performance. The clearly audible signal in the 80° x 80° coverage angle is easy on any singer’s voice – the more precise they hear themselves, the less effort is required for their performance. At the same time, the SMX 12 monitor remains uncomplicated and feedback-proof.

The SMX 12A boasts a 2-channel Class-D amplifier with a total power of 484 W (LF: 416 W @ 6.5 Ω, HF: 68 W @ 14 Ω) on board. So there is no need for an external device – the internal amp is optimally matched to the speakers and brings eight DSP presets to make the set-up as short and simple as possible.

SMX 12A monitors can also be used in combination with subwoofers such as the S 15 PRO for small to medium-sized events, or for fixed installations. The recessed I/O panel ensures a neat and tidy appearance on stage or in any other application. Equipped with M10 fly points and accessories like the SMX 12 UB U-bracket, SMX 12A can be utilized for applications where the speaker needs to be mounted to a wall, ceiling, truss or speaker stand. The optional padded cover SMX 12TC protects the monitor during transport and storage.

Interested in the product?

Then make an appointment now.

Features

12" High efficiency woofer

SMX 12A is a compact yet powerful tool for various monitoring requirements on and off stage.

8 intelligent DSP presets

Gain and a special preset selector with 8 practical factory settings increase the application range.

Recessed connector panel

Due to the recessed I/O panel of the monitoring system, no connectors are visible to the viewer.

 

Specifications

SMX 12 Drawing

Model:SMX 12A
ACOUSTICAL
Frequency range (-3 dB)*:65 Hz – 17 kHz
Frequency range (-10 dB)*:60 Hz – 20 kHz
Coverage angles (-6dB) [H x V]:80° x 80°
Maximum Peak SPL *:129 dB
System type:2-way coaxial system
Transducers:

Coaxial driver with:
LF: 1 x 12″ driver (3″ voice coil)
HF: 1″ compression driver (1.7″ voice coil)

Enclosure type:Vented box
AMPLIFICATION
Type:2 channel, class-D with SMPS
Total power **:484 W
Output power (per channel):LF: 416 W @ 6.5 Ω
HF: 68 W @ 14 Ω
Protection:Short circuit, overheating, overcurrent, 2-band limiter
Connectors:Input Signal: balanced XLR 3-pin female or balanced 6.5 mm TS jack
Link output: balanced XLR 3-pin male
Power input: powerCON® 20A
Power link output: powerCON® 20A
Operating Voltage:100 VAC – 240 VAC, 50 – 60 Hz
Wiring:Pin N: Neutral
Pin L: Conductor
Pin E: Ground
Input sensitivity:0 dBu
DSP:48 kHz/24-bit with extended dynamics
Processing latency: 1.1 ms
Processing:Level, factory EQ presets
User controls:Power: ON/OFF switch
Level: 8-position rotary knob (-50, -20, -10, -4, -2, 0, +2, +4)
DSP presets: 8-position rotary knob
MECHANICAL
Product dimensions [H x W x D] (Including rigging):368 x 450 x 575 mm
Net weight:22 kg
Packaging dimensions [H x W x D]:447 x 535 x 660 mm
Total weight:25 kg
Cabinet:15 mm plywood
Cabinet finishing:Black polyurea coating
Grille:Powder coated perforated steel
Hardware:1 top and 2 side handles embedded in cabinet
Rubber feet
2 x M10 for U-bracket mounting
ACCESSORIES
U-bracket:SMX 12UB
Pole bar:SPS20
M10 screw to 35mm pole socket:PS35
Transport cover:SMX 12TC
All product specifications are subject to change without prior notice.* Measured with 12 dB Crest factor Pink Noise, Whole space
** Total power value is the sum of all individual channel output power

Accessories

SMX 12
SMX 12 Rigg-Mount

Maximum Versatility

SMX 12 and SMX 12A are excellent stage monitors – and much more. The extensive accessories allow for a large number of different applications besides classic monitoring.

The centrepiece is the SMX 12 UB mounting frame – it allows the SMX 12 and SMX 12A to be tilted steplessly, for example, for wall mounting. With the SPS20 mounting pole, the SMX monitors can be mounted on a subwoofer in a flash and thus become an ultra-portable PA system or a quickly set-up side fill. Rigging is also possible with the SMX 12 or SMX 12A flown as front fill, for example. In short, using the speakers of the SMX series exclusively as monitors is an excellent choice – but almost a waste.

SMX 12 Rigg-Mount
SMX 12 UB

SMX 12UB

This U-bracket provides mounting holes for wall mounting or pole support adapter PS35 or other industry-standard hardware, like truss clamp.

PS35

PS35

Pole support adapter, model PS35, M10 to 35 mm speaker poles.

M-F3A SPS20

SPS 20

Distance bar/pole support to connect from M20 thread in subwoofers to PS35.

SMX 12 TC

SMX 12TC

SMX 12 transport and storage protection cover

Downloads